Need help?Do you have a question about the Sim2 D10 and is the answer not in the manual?
Verifies that all included items are present after unpacking the projector.
Identifies and describes the external components and controls of the projector.
Explains the functions of each button on the remote control for operating the projector.
Specifies the effective distance and angle for using the projector's remote control.
Compares the functions of the projector's physical buttons with the remote control buttons.
Step-by-step instructions for installing batteries into the projector's remote control.
Guide on how to connect various video sources and computers to the projector.
Procedure for powering the projector on and off, including initial setup language selection.
Instructions for setting the projector's height and tilt for optimal screen alignment.
How to use the projector's rings to adjust image focus and screen size.
Overview of how to navigate and use the projector's on-screen display menus.
Procedure for changing the language displayed in the projector's on-screen menus.
Illustrative guide to all available settings and their ranges within the OSD menu.
Detailed explanation of image adjustment options like brightness, contrast, and color.
Covers settings for image positioning, aspect ratio, keystone, and other display features.
Details on blank screen, projection type, power modes, and memory settings.
Allows selection of the display language for the OSD menu and other system messages.
Advanced settings for fine-tuning red, green, and blue color levels and offsets.
Displays system information such as model name, software version, and lamp hours.
Step-by-step guide for safely removing and installing a new projector lamp module.
Procedure to reset the lamp usage timer after replacing the lamp module.
Instructions for cleaning the projector exterior and the optical lens safely.
General advice and best practices for diagnosing and resolving projector issues.
Explanation of LED blinking patterns and their corresponding error codes.
Guides for diagnosing and fixing common image and lamp-related issues.
Solutions for issues where the projector does not respond to the remote control.
Technical details of the projector's hardware, including resolution, weight, and power.
Lists and describes all available ports for connecting external devices.
Table detailing supported resolutions and frequency compatibility for various signal types.
Information regarding FCC compliance for Class B digital devices and potential interference.
Statement of compliance with Canadian ICES-003 for digital apparatus.
List of safety standards and directives the projector complies with.
Details on Class B product EMC compliance and potential radio interference.
To Next Page
General
