Sim2 D10 - 6. SPECIFICATIONS; Hardware Specifications; Input;Output Connectors

D10
38
6. SpecificatiOnS
Hardware Specications
MOdel d10
Display type TI DMD 0.65-inch x 1, 12 degrees, LVDS DMD with DDP3020
Resolution WXGA (1280x768)
Color 16.7 Million (24-bits/pixel)
Weight 4kg / 8.8lbs
Projection distance 1.5 to 7 meters (59 to 275 inches)
Projection screen size 0.98 to 5.25 meters (38 to 206 inches)
Projection lens Manual zoom; manual focus
Zoom ratio 1.15:1
Horizontal keystone correction +/- 40 degrees
Vertical keystone correction +/- 15 degrees
Projection methods Desktop front/rear; ceiling front/rear
Data compatibility IBM PC or compatibles (VGA, SVGA, XGA, SXGA), Mac
SDTV/EDTV/HDTV 480i, 576i/480p, 576p/720p, 1080i, 1080p
Video compatibility NTSC/NTSC 4.43, PAL (B/G/H/I/M/N 60), SECAM
H-Sync 15,31 - 90 kHz
V-Sync 50 - 85 Hz
Safety certication
FCC Class B, UL, c-UL, CE, CCC, EN 60950-1 2004,
Low voltage Directive 2006/95EC, UL 60950-1
Operation temperature 10° C ~ 35° C
Dimensions See “Projector Dimensions” on page 41
Power consumption
110Vac: Typical 253W (normal mode); Typical 228W (Eco mode)
220Vac: Typical 246W (normal mode); Typical 222W (Eco mode)
(AC input: 100 - 240Vac 3.0A - 1.2A 50/60Hz)
Stand By < 1 watt
Lamp Boost mode: 230W; normal mode: 200W; Eco mode: 180W
Input/output Connectors
MOdel d10
PC RGB
Video
Composite video (RCAx1)
Mini-jack to S-Video (Mini-DIN)
Component (RCA x3)
DVI-D (HDCP)
HDMI (HDCP)