CRYSTAL4-SH
User Guide
33
Display – Image Settings
Display Mode
There are many factory presets optimized for various types of images:
NATURAL: this mode is intended to reproduce, as close as possible, the image the way
the movie director intended.
DYNAMIC: this mode is suitable for showing PowerPoint presentations when the
projector is connected to the PC.
BRIGHT: maximum brightness from PC input.
CINEMA: default settings for home theater.
SPORT: select this mode to increase the brightness and response time level for
enjoying sporting events and video games.
HDR: this mode is intended to reproduce the images in High Dynamic Range. This
mode is the default mode for the HDR images and it will recalled every time the
projector will detect an HDR content inside the signal.
HLG: this mode is intended to reproduce the images processed with the Hybrid Log
Gamma curve.
BrightHDR: it is the default Mode for the HDR signal. It has the same function as the
HDR Mode, but is designed to have the maximum brightness in this status.
BrightHLG: It has the same function as the HLG Mode, but is designed to have the
maximum brightness in this status.
USER: user's settings.
Display Mode value
Noise Reduction value
HDR Settings value
Brightness value
Contrast value
Sharpness value
Color value
Tint value
Gamma value
Color Adjustments
Analog Signal
Auto Adaptive Contrast value
Super Hybrid Mode value
Laser Modulation value
Advanced Image Processing
Reset
To Next Page
Loading...
