he power cord is fitted with a molded plug incorporating a 13A fuse. Should the
use need to be replaced an ASTA approved BS 1362 fuse must be used of the
ame rating. If the fuse cover is detachable never use the appliance with the cover
removed. If the plug fitted is not suitable for your socket outlet it should be cut of
nd destroyed. The end of the power cord should them be suitably prepared and
he correct plug fitted as below.
ARNING: A PLUG WITH BARED POWER CORD IS DANGEROUS IF
PLUGGED INTO A LIVE SOCKET.
ARNING: This appliance must be earthed
Important: The wires in the mains lead are coloured in accordance with the
ollowing code:
Green & Yellow - Earth
Blue - Neutral
Brown - Live
s the colours of the wires in the mains lead may not correspond with the
oloured markings identifying the terminals in your plug, proceed as follows:
onnect Green & Yellow wire to terminal marked E or coloured Green & Yellow;
onnect Brown wire to terminal marked N or coloured red; connect Blue wire to
erminal marked N or coloured black. If a 13A plug (BS 1363) is used it must be
itted with a 13A Fuse.
Some hints and tips.......
Use your steam cleaner to de-frost the freezer. It melts the ice quicker and
terilises at the same time.
Get rid of unwanted odours on clothing (e.g. after going to a smoky pub) by
afting steam from the crevice tool over the fabric. It brings back the freshness
nd gets rid of creases.
Use on mountain bikes garden tools and kid’s toys to remove mud. On car and
motor bike engines to remove grease.
If you find that the cloths wear quickly always have a double layer of cloth over
he bristles. Place the cloth on a flat surface and fold the longest edges into the
middle. Place the tool onto the cloth so that the bristles are over the double cloth
layers then fold up to the clips. Did you know that you can save money by using
ld towels instead of the cloths supplied with the machine? They work just as well
nd it's a good way of using up part worn towels.
Blast out black mould from joints in shower enclosures and bath edges using the
revice tool. You'll be surprised what's lurking in the places that you can't see. Be
ure to wipe up the mould with a cloth straight away since the steam 'cooks' it and
if left to cool it sticks like glue making another cleaning task!
To Previous Page
Loading...
