Need help?Do you have a question about the Simadre CT5200D and is the answer not in the manual?
Covers electrical shock, fumes, UV, fire risks, and noise.
Details machine features, material compatibility, and warranty.
Lists required external parts for setup.
Guides wiring the plug and connecting the regulator/filter.
Details connecting the regulator, filter, and hoses.
Covers ventilation needs and gas connection tips.
Guide for TIG welding setup and initial steps.
Details TIG execution and stick welding initiation.
Instructions for performing stick welding.
Covers safety, setup, and performance of plasma cutting.
Maintenance schedule and internal system diagram.
Identifies parts of the SG-55 and PT-31 plasma torches.
Lists and identifies parts of the TIG torch.
Solutions for power, fan, arc start, and current problems.
Solutions for welding, cutting, and other common issues.
General| Input Voltage | 110/220V |
|---|---|
| Input Frequency | 50/60Hz |
| Rated Duty Cycle | 60% |
| Insulation Class | F |
| Protection Class | IP21S |
| Plasma Cutting Thickness | 8mm |
| Efficiency | 85% |
| Welding Process | TIG, MMA, Plasma Cutting |
| Output Current Range | 20-200A |
To Next Page
