Simadre CT5200D - General Description, Features, and Warranty; Product Overview, Capabilities, and Warranty Terms

GENERAL DESCRIPTION
The CT5200D/DX 3-in-1 system is manufactured with advanced inverter technology,
allowing greatly reduced size and weight while raising the plasma cutting performance by
30 percent.
Key features of the CT5200D/DX include:
 reliability
 compactness
 portability
 high efficiency
 high-frequency arc starting
 stable output over wide range of arc length
 plasma cutting
 stick (MMA) welding
 TIG welding
The CT5200D/DX can be used for cutting and welding:
 carbon steel
 stainless steel
 mild steel
 alloy steel
 copper, aluminum and other nonferrous metals
WARRANTY
The CT5200D/DX is sold with a one year warranty, beginning at the date of
purchase, against defects in workmanship or engineering. During the warranty
period, all parts and labor will be provided free of charge, exclusive of shipping.
Deliberate damage to the machine will void this warranty. Normal wear and tear,
or damage due to improper use, are not covered. Only qualified technicians
approved by Simadre TECHS are authorized to carry out repairs on the CT5200D.
DIY repairs internal to the system will void the warranty.