Stepper Base M10
The device must not be exposed to rain or humidity in order to avoid risk of fire and/or electric
shock.
• Operating room temperature: 59°F - 95°F
• The recommended operation time of the wheel with continuous force feedback activity is 1 hour.
• Excessive use may cause health risks. We recommend to take a break of 5 minutes every 20
minutes, and do not drive for more than 2 hours per day.
• Not intended for children under the age of 13 years old. Contains small pieces which pose a
choking hazard!
• Do not open the casing of the device.
• This device contains components that cannot be repaired by the user, opening will void the
warranty.
WARNING! Electrical Safety
• The Stepper Base M10 must be connected to an appropriate power source:
• Always connect the DC side of the power supply to the wheel base before connecting the
AC side of the power supply to your wall socket.
• Use only the power supply and power cord that came with your Stepper Base M10.
Replacements may only be issued from an authorised repair centre.
• Do not use non-standard power sources, such as generators or inverters, even if the voltage
and frequency appear acceptable. Only use AC power provided by a standard wall outlet.
• To avoid damage, do not expose your Stepper Base M10 to sources of heat.
• When connecting and / or disconnecting any steering wheel to / from Stepper Base M10
take care of the pins inside the Quick Release.
• Unplug the power cord of your Stepper Base M10 during storms or when unused for
long periods of time.
• If the Stepper Base M10 becomes damaged in any way, stop using it immediately and
contact Simagic Customer Support http://www.simagic.com
ATTENTION
Stepper Base M10 is fully usable out-of-box. We always recommend updating to the
latest firmware. See chapter ‘Firmware and driver update’ for more details. A PC is required to
update your firmware.
• All specifications in this document are subject to change. The Stepper Base M10 firmware
and/or PC driver may be updated to implement new features or general improvements.
• This product contains the all other Simagic steering wheels which might be mentioned in this
manual are not included within the Stepper Base M10 package and sold separately. You
can obtain them from the Simagic webshop: www.simagic.com
• This manual discusses assembly, connections, and functions related to Simagic steering wheels
and other additional devices. This is not a replacement manual for the other corresponding
products! Read the quick guides or user manuals for the other products as well!
• The warranty does not include defects that are due to commercial use of the product. See
chapter “Warranty” at the end of this user manual as well as the Terms & Conditions at
www.simagic.com for more details.
GENERAL NOTES
4
To Next Page
Loading...
