Need help?Do you have a question about the Simaudio AURORA and is the answer not in the manual?
Power| power supply transformer | 2kVA |
|---|---|
| power supply capacitance (5-ch) | 177, 000µF |
| power supply capacitance (7-ch) | 183, 000µF |
Electrical Specifications| power output at 8Ω (any channel) | 200 Watts |
|---|---|
| power output at 4Ω (any channel) | 400 Watts |
| frequency response | 10Hz - 100kHz +0/-3dB |
Current and Voltage| maximum output voltage | 42 Volts |
|---|---|
| maximum current – peak | 28 amperes |
| maximum current – continuous | 14 amperes |
Dimensions and Weight| dimensions (W x H x D) | 19 x 9-5/8 x 22 inches |
|---|---|
| shipping weight (5 channels) | 106 lbs / 47 kgs |
| shipping weight (7 channels) | 112 lbs / 50 kgs |
Welcome message and introduction to the MOON Aurora amplifier's features and design.
Instructions and important notes for safely removing the amplifier from its packaging.
Critical safety advice regarding electrical hazards, ventilation, and voltage compliance.
An overview of key design features contributing to the amplifier's performance.
Instructions for proper placement, ventilation, and avoiding EMI interference.
Details on input/output connectors, power switch, fuse, and 12V trigger on the rear panel.
Electrical safety warnings for the rear panel, including not opening and fuse replacement.
Guidance on connecting input cables, speaker cables, and respecting polarity.
How to connect the AC power cable, recommending dedicated outlets.
Step-by-step guide for powering on, recommended on/off sequences, and 12V trigger use.
Steps to diagnose common issues like DC detection, no power, and fuse problems.
Detailed technical data including configuration, power, impedance, dimensions, and requirements.
Defines pin assignments for balanced inputs and specifications for the 12V trigger.
Provides shipping weights for 5-channel and 7-channel versions.
To Next Page
