Simaudio MOON 110LP User Manual

Owner’s Manual
MOON 110LP v2
Phono Preamplifier
The performance of a lifetime

Simaudio MOON 110LP Specifications

General

Type	Phono Preamplifier
Gain	40 dB / 60 dB
Inputs	1 x RCA
Outputs	1 x RCA
Input Impedance	47 kOhm
Input Capacitance	100 pF
Output Impedance	100Ω
Frequency Response	20 Hz - 20 kHz

Summary

Product Introduction

Introduction

Thank you for selecting the MOON 110LP v2 Phono Preamplifier. Explains design goals and break-in period.

Key Design Features

Design Features

Lists key design features of the MOON 110LP v2, including adjustable impedance, capacitance, gain, and PCB design.

Unpacking the Unit

Unpacking

Details accessories included with the MOON 110LP v2 and instructions for inspecting the unit.

Installation and Placement Guidelines

Installation & Placement

Guidance on placing the unit on a solid surface away from heat and EMI sources.

Rear Panel Connections and Operation

Rear Panel Connections

Details the connections on the rear panel, including inputs, outputs, ground, and power.

Powering Up and Sequence

Instructions for powering up the unit and the correct on/off sequence to avoid noise.

Input Settings for Cartridge Adjustment

Input Settings for Cartridge Adjustments

Guide to adjusting gain, curve, resistance, and capacitance using dipswitches for optimal cartridge performance.

Technical Specifications

Specifications

Technical specifications of the MOON 110LP v2, including circuit layout, input/output, RIAA curve, and dimensions.