EasyManua.ls Logo

Sime Brava Slim HE 40 R i User Manual

Sime Brava Slim HE 40 R i
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Fonderie SIME S.p.A.
6322891C - 06/2022 - R6
C od.
INSTALLATION AND SERVICING INSTRUCTIONS
BRAVA SLIM HE R
Gas Safety Certified AS/NZS 5263.1.2
LN: SAI-400196
CAUTION
This product must be installed exclusively by professionally
qualified personnel in accordance with the requirements of
the standards AS/NZS 5601, AS/NZS 3500, AS/NZS 3000 (cur-
rent version) of the local gas, electricity authorities and other
relevant legislation.
Condensing wall mounted boiler
EN
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
To consult the documentation,
visit our website www.sime.it

Table of Contents

Other manuals for Sime Brava Slim HE 40 R i

Question and Answer IconNeed help?

Do you have a question about the Sime Brava Slim HE 40 R i and is the answer not in the manual?

Sime Brava Slim HE 40 R i Specifications

General IconGeneral
Boiler TypeCombi
Max. Domestic Hot Water Output40 kW
FuelNatural Gas / LPG
Output40 kW
Weight37 kg
Max working temperature85°C
IgnitionElectronic
Heat exchanger materialStainless Steel
MountingWall-mounted
Fuel TypeNatural Gas
Dimensions (H x W x D)700 x 400 mm

Summary

SAFETY WARNINGS AND REGULATIONS

GENERAL SAFETY WARNINGS

Essential safety precautions and regulatory information for operating the boiler.

RESTRICTIONS

PROHIBITED ACTIONS

Actions strictly forbidden to ensure safe operation and prevent damage.

USING THE BOILER BRAVA SLIM HE R

CONTROL PANEL AND DISPLAY

Explanation of the control panel buttons, symbols, and display indicators for boiler operation.

FAULT CODES AND SHUTDOWN PROCEDURES

How to address fault codes and procedures for boiler shutdown.

DESCRIPTION OF THE APPLIANCE

CONTROL PANEL AND WIRING DIAGRAM

Explanation of the control panel interface and the complete wiring diagram.

INSTALLATION

NEW INSTALLATION AND SYSTEM PREPARATION

Steps for installing a new boiler, including system cleaning and water treatment.

COMMISSIONING

AUTOMATIC SELF-CALIBRATING PROCEDURE

Detailed steps for the automatic calibration process required after installation.

PARAMETER SETTING AND DISPLAY

How to set parameters and view boiler information.

MAINTENANCE AND TROUBLESHOOTING

UNSCHEDULED MAINTENANCE AND FAULT CODES

Procedures for unscheduled maintenance and a comprehensive list of fault codes.

Related product manuals