Need help?Do you have a question about the Sime BRAVA ONE BF and is the answer not in the manual?
General| Mounting | Wall-mounted |
|---|---|
| Output | 24 kW |
| Warranty | 2 years |
| Fuel Type | Natural Gas |
| Dimensions (HxWxD) | 700x400x290 mm |
Covers essential safety instructions and precautions for using the appliance.
Lists actions that must not be performed to ensure safe operation and prevent damage.
Provides guidance on operating the Brava One BF boiler.
Details the control panel, its knobs, buttons, and display symbols for operation.
Procedures for initial checks before starting the boiler and the ignition process.
Instructions for setting heating and domestic hot water temperatures.
Explains fault codes displayed and basic troubleshooting steps.
Guidance on how to temporarily interrupt boiler operation and safety precautions.
Procedure for safely shutting down the boiler when unused for extended periods.
Overview of the Brava One BF boiler's main design choices and special features.
Details the built-in safety sensors and pressure relief mechanisms.
Information on how to identify the boiler model and locate the technical data plate.
Diagram and list of the main internal and external components of the boiler.
Comprehensive list of technical data, performance metrics, and electrical specifications.
Description of the water circuits, sensor types, and expansion vessel details.
Information on the circulation pump performance and the control panel's components.
Visual representation of the boiler's electrical connections and important safety notes.
Guidelines for receiving, handling, and selecting the installation room for the boiler.
Steps for preparing the heating system and physically installing the boiler.
Details on connecting water pipes, gas supply, and optional plumbing accessories.
Information on permitted smoke outlets and combustion air inlets, including coaxial and separate ducts.
Instructions for connecting the boiler's power supply and optional control devices.
Details on fitting external sensors and chrono-thermostats for system control.
Procedure for refilling the boiler and heating system with water.
Steps for safely emptying the domestic hot water circuit and the boiler.
Essential checks and steps to take before starting the boiler for the first time.
How to access, view, and adjust boiler operating parameters.
Detailed list and explanation of configurable parameters for the boiler.
Viewing operational data, counters, and activated alarms.
Procedures for performing checks and adjustments, including chimney sweeper function.
Detailed steps for adjusting gas pressure at the boiler nozzles for optimal performance.
Steps for preparing the boiler and replacing gas nozzles for conversion.
Procedure required after gas conversion or component replacement for proper operation.
Routine adjustments and cleaning of the boiler's exterior.
Procedures for cleaning internal components like the heat exchanger and burner.
Performing general checks and addressing unscheduled maintenance needs.
Comprehensive list of fault codes, their meanings, and recommended solutions.
Understanding the 'SE' indicator for scheduled maintenance.
To Next Page