Note: All the pictures in this manual are for explanation purpose only. They may be slightly different
from the appliance you purchased (depend on model). The actual appearance shall prevail.
■
Basic Installation Tools and Materials Needed
To connect the water pipes.
Straight screwdriver,
Phillips screwdriver
To disassemble the housing
cover and connect wires.
To trim thread and strip wire.
To connect the tank inlet water pipes.
Water pipe, Flexible joint
Depend on the actual need
Choose PPR pipes or PAP pipes.
Hot water pipe,
Insulation material
Depend on the length of
the hot water pipe
■
Installation Instructions
1. Appliance Moving
●
This appliance is quite heavy so that it requires two or more people to move and install, or it may
cause in personal injury or otheraccidents.
●
Please transfer the appliance as its delivery status, do not disassemble it by yourself.
●
In order to avoid scratches and deformation on the surface, please add protection board over the
surface of the appliance where may contact hard objects directly.
●
Be careful not to touch the fan with your hand or other objects.
●Do not transfer the appliance with inclination over 45°. Do not lay down the appliance on the floor.
To Next Page
Loading...
