Need help?Do you have a question about the Sime FRIENDLY FORMAT and is the answer not in the manual?
Details manufacturer's guarantee, extended warranty conditions, and compliance requirements for parts and labour.
Outlines responsibilities for manufacturers and installers of domestic heating and hot water products.
Requirements for installers to ensure competent, compliant, and safe installation, commissioning, and servicing.
Installer obligations for customer interaction, product explanation, and after-sales support.
Information on the Benchmark Scheme for improving installation, commissioning, and servicing standards.
Emphasizes the need for a correctly filled Benchmark Checklist and installer verification.
Overview of the Sime "FRIENDLY FORMAT" as an automatic, wall-mounted combination boiler.
Explains how the boiler functions in winter and summer modes for heating and hot water.
Step-by-step guide on how to operate the boiler, including lighting and turning it off.
Detailed procedure for starting the boiler, including checks and switch operations.
Instructions for temporarily or long-term shutdown of the boiler.
Specifies the required minimum space around the appliance for servicing.
Recommendation for annual servicing by a registered person to ensure efficient operation.
Provides details on specific components and settings of the boiler.
Explains the safety function of the overheat thermostat and reset procedure.
Guidance on reading the pressure gauge for system status and leak detection.
Details electrical connection requirements, plug type, and earthing for the appliance.
Instructions for configuring the heating timeswitch according to user needs.
Requirements for proper ventilation when the appliance is installed in a cabinet.
Instructions on how to clean the boiler's outer casing using appropriate methods.
Essential safety advice for the operation and maintenance of the appliance.
Critical procedure to follow immediately if a gas leak is suspected or detected.
To Next Page
General