Need help?Do you have a question about the Sime RMG Series and is the answer not in the manual?
Key checks recommended before starting boiler installation to ensure safety and proper operation.
Overview of the RMG boilers, their design purpose, and compliance with European directives.
Detailed specifications including physical dimensions and key technical performance data of RMG models.
Specifies the necessary dimensions and requirements for the boiler room based on safety standards.
Guidelines for connecting the system, including pipe fittings, shutoff valves, and system filling procedures.
Essential feedwater treatment requirements and the need for a gas pipe filter to prevent malfunctions.
Requirements for flue connection, including material, insulation, and sizing for efficient combustion product expulsion.
Details on the electrical supply requirements, safety precautions, and proper earthing for the boiler.
Explains the control box function, operating cycle, potential ignition failures, and ionization circuit.
Describes the function of the regulation thermostat for heat output and the smoke safety device.
Presents data on head loss in relation to flow rate for different boiler models.
Details on the gas valve type and procedures for adjusting operating pressures.
Step-by-step guide for setting nominal and reduced gas pressures for different gas types.
Instructions for converting the boiler to different gas types and disassembling the shell for maintenance.
Annual maintenance tasks including cleaning the heat exchanger and burners for optimal performance.
Troubleshooting common issues such as no burner ignition, no heating, or pressure regulation problems.
Crucial warnings regarding operation, repairs, and handling of the boiler to prevent injury or damage.
Guidance on boiler ignition, adjusting heating temperature, and operating the safety thermostat.
Procedure for safely turning off the boiler and gas supply for long periods of inactivity.
Instructions for resetting the smoke safety device if it activates due to smoke emission.
Procedure to reset the boiler control box if it enters a 'lock out' state due to ignition failure.
Information on necessary steps and professional consultation for converting the boiler to different gas types.
Recommendation for annual servicing by authorized personnel to ensure efficient operation and safety.
To Next Page
General