Why my Simfer Oven does not heat?
There are several reasons why your Simfer Oven might not be heating: 1. Ensure the oven door is fully closed, and restart it. 2. Verify that the oven controls are correctly adjusted by consulting the operation section and resetting the oven. 3. Check the fuse or circuit breaker and replace or reset it. If the issue persists, contact an electrician.
Why does my Simfer Oven turn off during cooking?
Your Simfer Oven might be turning off during cooking due to several reasons: 1. It may be due to too long continuous operation. Let the oven cool down after long cooking cycles. 2. Check if the cooling fan is operating. Listen for the sound from the cooling fan. 3. Ensure the oven is installed in a location with good ventilation, maintaining the clearances specified in the operating instructions. 4. Make sure only one plug is used for each wall socket.
Why is smoke coming out of my Simfer B6ES16016 during operation?
Smoke may come out of your Simfer Oven during operation due to these reasons: 1. If you are operating the oven for the first time, smoke comes out from the heaters. This is not a fault and will stop after 2-3 cycles. 2. There might be food on the heater. Allow the oven to cool down and clean any food residues from the ground of the oven and the surface of the upper heater.
Why does the outer surface of my Simfer B6ES16016 get so hot during operation?
If the outer surface of your Simfer Oven gets very hot during operation, it may be because the oven is not installed in a location with good ventilation. Ensure that the clearances specified in the operating instructions are maintained.
Why doesn't my Simfer Oven cook well?
If your Simfer Oven isn't cooking well, it may be because the oven door is opened frequently during cooking. Avoid opening the door unless necessary, as this can cause the internal temperature to drop and affect cooking results.
What to do if the internal light of my Simfer Oven is dim or not working?
If the internal light in your Simfer Oven is dim or not working, there are a couple of things to check: 1. Ensure there is no foreign object covering the lamp during cooking. Clean the internal surface of the oven and check again. 2. The lamp itself might be faulty and need replacement with a lamp of the same specifications.
Why do I get an electric shock when touching my Simfer B6ES16016 Oven?
If you experience an electric shock when touching your Simfer Oven, it may be due to: 1. Lack of proper grounding. Make sure the power supply is grounded properly. 2. The use of an ungrounded wall socket.
Why is there a burnt or plastic odor coming from my Simfer B6ES16016?
If you notice a burnt or plastic odor coming from your Simfer Oven, it's likely because plastic or other non-heat-resistant accessories are being used inside the oven. At high temperatures, ensure you are using suitable glassware accessories.
Why is water dripping from my Simfer B6ES16016?
Water or steam may generate under certain conditions depending on the food being cooked. This is not a fault of the appliance. Let the oven cool down and then wipe it dry with a cloth.
Why does the cooling fan continue to run on my Simfer B6ES16016 Oven after cooking is finished?
The cooling fan operates for a certain period after cooking to ventilate the internal cavity of the Simfer Oven. This is normal, so there is no need to worry.
To Next Page
General
