4
POWER INTERRUPTS
After any interrupt of mains power, your oven will be inactive after the power is restored,
for safety reasons. After power on, the time of day digits and
AU TO
symbol will ash and
the time of day has to be adjusted (see: power on).
Note: The ashing
AU TO
symbol indicates that the oven is inactive and you have to
enter the manual mode.
CHILD LOCK
This function is intented to prevent any unauthorized modication of the timer
settings. When this function is active, any button press except the button itself,
will be inactive.
To activate this function, press and hold the button until appears on the
screen, approximately for 3 seconds. To deactivate it, do the same until the symbol
disappears.
Note: Any alarm sound can be stopped by any button press, even the child lock function
is active.
PROGRAMMABLE OPTIONS
Alarm tone:
Whenever no adjustment mode is active, pressing and holding the button will
result in the currenly valid buzzer tone being produced. By releasing and pressing the
same button again, you may scroll through 3 available buzzer tones. The last heard
buzzer tone will be automatically recorded as the selected tone.
Note: Programmable options are nonvolatile and will be resident after any power failure.
To Previous Page
Loading...
