BOX B (Hardware kit)
BOX C
(Pedal tray)
BOX D
(Feet)
BOX A (Profile kit)
5/6 mm 11 mm
Required tools:
Thank you for purchasing a Sim-Lab P1-X sim racing chassis! On
the following pages you will find a detailed instruction howe to build
this cockpit. Assembling requires a set of simple tools, and general
knowledge of how to use them and a bit of technical insight.
There are 12 Variant of the P1-X sim racing cockpit. Every variant is
covered in this manual. Take care to find the illustrations that are
applicable to the one you chose. Generally it takes about 3-4 hours
to build this cockpit. Before starting please check contents and
make sure all the parts are accounted for in the packages.
2
To Next Page
Loading...