Simon XTi User Manual

Simon XTi Quick Guide
https://alpha.adt.com/help/281[11/28/2018 12:28:27 PM]
Simon XTi - Quick Guide
For a detailed review of the entire system, please view the Simon XTi manual.
« Help Center
Arm &
Disarm
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, select the [ARM] button from
the home screen, then select the [Arm All] button.
To arm all sensors in STAY mode when you are not leaving the premises, select the [ARM] button
from the home screen, then select the [Arm Doors + Windows Only] button.
Disarm:
To disarm, select the [DISARM] button from the home screen, then enter your [security code].
Select

Simon XTi Specifications

General

Manufacturer	Interlogix
Hardwired Zones	2
Partitions	2
Two-Way Voice	Yes
Z-Wave	Yes
Siren Output	Yes
Display	3.5-inch color touchscreen
Communication	Cellular
Operating Temperature	0° to 49°C (32° to 120°F)
Wireless Zones	40
Power Supply	9VDC

Summary

Arm & Disarm

Arming the System

Instructions for arming the system in AWAY or STAY mode.

Disarming the System

Steps to disarm the system by entering a security code.

Battery

Bypass Protected Areas

Change Date and Time

Chimes and Beeps

Reset

Security Codes

Trouble Conditions

Volume

Program Beep Volume

Adjusting the beep volume using arrow buttons.

Program Piezo Beeps

Toggling piezo beep settings between On and Off.

Program Piezo Alarms

Toggling piezo alarm settings between On and Off.

Program Panel Voice

Toggling panel voice settings between On and Off.