Fig. 9
Fig. 7
Fig. 8
40
UK
• do not leave the appliance exposed to
atmospheric agents (rain, sun, etc.);
• do not let the appliance be used by
children, unauthorised staff or staff
who have not read and fully under-
stood the contents of this handbook.
Before servicing the appliance, the
authorised technician must first switch
off the appliance and remove the plug.
To clean the appliance, set the machine to
the “0” energy level, that is, “WITH THE
MACHINE SWITCHED OFF AND THE PLUG
REMOVED FROM THE MAINS” and follow
the instructions in this handbook.
If the appliance breaks down or fails to work
properly, switch it off. Any intervention is
strictly forbidden. Contact qualified experts
only.
Repairs should only be made by the manu
-
facturer or authorized service centres. Only
original spare parts must be used. Failure to
For installation, the qualified electrician
must fit an omnipolar switch in accord-
ance with the safety regulations in force
and with 3 (0,12) or more mm (in) between
contacts.
To avoid dangerous overheating, make
sure the supply cord is fully uncoiled.
Do not obstruct the extraction and/or dis-
sipator grids, especially of the cup warmer.
The user must not replace the appliance
supply cord. If the cord is damaged,
switch off the appliance and have a quali-
fied technician change the cord.
If no longer using the appliance, we
recommend making it inoperative; after
removing the plug from the mains elec-
tricity, cut the power supply cable.
Do not dispose of the machine in the
environment: to dispose of the machine,
use an authorised centre, or contact the
manufacturer for relative information.
observe the above, could make the appliance
unsafe.
• do not pull the supply cord out of
the socket to disconnect it from the
mains;
CAUTION
RISK OF POLLUTION
To Next Page
Loading...
