Simonelli MICROBAR - De-Scaling Cycle

UK
59
8. SPECIAL MACHINE
SCALING FUNCTIONS
This function allows you to reset the total amount of
water used.
Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and pressing down on the key:
until the display reads
This function makes it possible to reset the total
number of washing cycles.
Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and pressing down on the key:
8.1 RESETTING THE
CLEANING FILTER
LITRE COUNTER
8.2 RESETTING WASHING
CYCLES
until the display reads
This function makes it possible to remove incor-
rect functioning data and to reinstate the Standard
Programming settings (see PRESET SETTINGS
chart).
Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and simultaneously pressing down on the keys
8.3 RESETTING MACHINE
PARAMETRES
ENTER
and RESET ;
until the display reads:
This function makes it possible to activate the motor
manually forming the automation of the manual cof-
fee delivery group. Proceed as follows:
• Release voltage by turning the main switch off
(OFF).
• Reinstate voltage by turning the main switch on
(ON) and simultaneously pressing down
on the arrow keys
 and  ;
until the display reads:
8.4 HANDLING MANUAL
COFFEE DELIVERY
GROUP
IMPORTANT: When the machine is switched
on, since the arrow key  is used
to access this site, the piston will
automatically start to move down-
wards.
• Press the arrow key
 to move the piston
DOWNWARDS.
• Press the arrow key
 to move the piston
UPWARDS.
•
Release and reinstate voltage using the main
switch to end the procedure.
7
5
3
1
2
4
2
4