14
It therefore makes it appropriate to adopt an instrument that detects these
temperatures for the protection of the engine, but especially for your and others'
safety.
We also inform you that high exhaust gas temperatures, in many cases, are a
symptom of poor carburetion. While high temperatures under the spark plugs,
usually, are due to poor ventilation (heat dissipation) of the engine, caused by the
presence of bodies and / or materials that prevent the passage of air cooling.
COMPONENTS AND TOOLS ON REQUEST
To have the possibility to customize the engine and then adapt it to different needs
and methods of use, SIMONINI offers a range of components on request:
§ PINION
In four different diameters (44/53/55/56) as well as providing the proper
reduction ratio, can be used to soften or make more rapid rise in engine
speed or to move, maintaining the propeller revolutions, any points of the
torque curve that does not meet your needs at a specified "range" of use, as
when cruising.
Code MINI2EVO/51 mm. 44
Code MINI2EVO/51 mm. 53
Code MINI2EVO/51 mm. 55
Code MINI2EVO/51 mm. 56
§ PROPELLERS
We propose a two-blades wooden propeller and armored vehicles, tractors or
pushing. Code E06 cm. 130
§ MAINTENANCE TOOLS
To facilitate maintenance operations, we propose two distinct tools with the
aim of exctracting the ignitions flywheel and engine pulley:
Code U02 Fly-wheel extractor
Code U06 Pinion extractor for diam. 53 / 55 / 56
To Next Page
Loading...
Need help?
General
