NOTE
Battery changes may only be carried out by trained personnel and only with
the battery key provided (Z4.KEY)!
NOTE
Programming with obsolete LSM version
New components can only be programmed with the current version of
LSM.
NOTE
Difficulty of operation of the lock due to stiff latch or bolt
If the latch or bolt of the mortice lock are stiff, the closing cylinder will also
be stiff.
Check that the latch or the bolt of the mortice lock are free-moving.
NOTE
Fitting error or incorrect order
If you make a mistake in measuring the door and order a closing cylinder,
the closing cylinder will not fit.
Check the dimensions of the door again before ordering.
Digital Locking Cylinder 3061
(Manual)
3. Product specific safety notices
13 / 54
To Next Page
Loading...