Different permanent/open modes
Thumb-turns
Material: Stainless steel
Colours: Stainless steel, brushed
Diameter: 30 mm
Length: 37 mm (from front surface of profile)
FH cylinder thumb-turns
Material:
Inside thumb-turn: stainless steel
cover; recessed grip: plastic; outer
thumb-turn: identical to standard
cylinders
Colours:
Cover: brushed stainless steel; re-
cessed grip: black; outside thumb-
turn identical to standard cylinders
Diameter: 30 mm
Length: 37 mm (from front surface of profile)
AP cylinder thumb-turns
Material:
Outside thumb-turn: identical to
standard cylinders: Aluminium
Colours:
Outside thumb-turn: Brushed stain-
less steel; internal thumb-turn:
Nickel-coated aluminium
Diameter: 30 mm
Length:
Outside: 37 mm (from front surface
of profile); internal: about 36 mm
(from front surface of profile)
MS cylinder thumb-turns
Material:
Outside thumb-turn: identical to
standard cylinders; internal thumb-
turn: identical to standard cylinders
Colours:
Outside thumb-turn: Cover made of
high-gloss brass; recessed grip: matt
brass: internal thumb-turn: Cover
made of high-gloss brass; recessed
grip: Matt brass
Diameter: 30 mm
Digital Locking Cylinder 3061
(Manual)
12. Technical data
48 / 54
To Next Page
Loading...