50
THE NEXT GENERATION CAR SEAT
STEP 6: Pull the shoulder portion of the vehicle belt (#27), route it around
the back of the Doona Car Seat and thread it through the vehicle
shoulder belt guide (#19) located at the back of the Doona Car Seat.
IMPORTANT! If ! If the vehicle belt is not long enough to wrap around
the back of the Doona Car Seat, proceed as follows:
• Route the shoulder portion between the Handle (#2) and the vehicle
seat back, then tighten it (see image below);
or
• Contact the manufacturer of your vehicle for information about a
vehicle belt extension.
To Next Page
Loading...
