KEYBOARD SET UP:
Typewriter Keys, Caps Lock
Auto Repeat; No Keyclick; Margin Bell; Warning Bell; Break Auto Answerback; Answerback = center, then CTRL
and B at the same time; Not Concealed.
TAB SET UP:
Does not matter
CUSTOM SET UP:
VDT ID: VDT 100
Compose Key: No-op, 25th Line, Protocol from Host: None
FUNCTION KEYS: (REQUIRES CTRL AND FUNCTION KEY)
SUGGESTIONS:
PROGRAM
RESULTS:
CTRL S Return
Signal Silence
LIST Return
List Status
;[ANY STATEMENT] Return
Print any statement (such as
local Phone number, etc.).
;CTRL L (25 ENTRIES)
Return
Clears Screen
CTRL X CTRL X HELP
Aborts printouts, calls HELP
Return
screen, (use for F 15)
CTRL D
Detector Reset
TIME Return
Calls up time and date
To save data, return to SET-UP Directory, cursor to SAVE, press ENTER, return by pressing SET UP KEY.
The above programming will allow the terminal to be supervised by the 2120. The 2120 port must be set up for
“GE” (or “GE ACK” if acknowledge function is desired). Function keys can be labelled per program if desired.
8
To Next Page
Loading...
