14
The keyboard must be plugged in to edit the setup screens.
Connect the cord from the keyboard to the system unit. The keyboard plugs into the round
connection atop the system unit. There are two of these connections - the one for the keyboard is
the one furthest back. See Figure 11.
Figure 11. Top Edge of New CPU Board
Note: It is important that you connect the keyboard before applying power to
the system. Otherwise, you may cause electrical damage.
1. Turn on the power at the breaker.
2. Reconnect the battery cable at the fuse.
Setting up the System for Reconfiguration
Connect the
Keyboard
Power Up the
System
Front Rear
Keyboard
Connection
To Next Page
Loading...
