16
1. Highlight and select “Advanced CMOS Setup” from the list on the main setup screen.
2. Make sure that “Floppy” is set as the 1
st
Boot Device.
3. Make sure that “ IDE-0” is set as the 2
nd
Boot Device.
AMIBIOS SETUP –ADVANCED CMOS SETUP
© 1996 American Megatrends, Inc. All Rights Reserved
Quick Boot Disabled Available Options:
1
st
Boot Device Floppy Disabled
2
nd
Boot Device IDE-0 Enabled
3
rd
Boot Device Disabled
Try Other Boot Devices No
Initial Display Mode BIOS
Display Mode at Add-On ROM Init Force BIOS
Floppy Access Control Read-Write
Hard Disk Access Control Read-Write
S.M.A.R.T. for Hard Disks Disabled
BootUp Num-Lock On
PS/2 Mouse Support Enabled
Primary Display VGA/EGA
Password Check Setup
Parity Check Disabled
Boot to OS/2 No
CPU MicroCode Updation Enabled
Internal Cache WriteBack ESC: Exit :Sel
External Cache Write Thru PgUp/PgDn: Modify
System BIOS Cacheable Enabled F2/F3: Color
Figure 13. Advanced CMOS Setup Screen
4. Press [ESC] to return to the main setup screen.
Note: To set the date, highlight and select “Standard CMOS Setup” from the main
setup screen and alter the contents as necessary.
Continued on next page
Configuring CMOS Setup, Continued
Check Setting in the
CMOS Screens
To Next Page
Loading...
