EasyManua.ls Logo

Simplex 4120 - Page 17

Simplex 4120
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
1. Highlight and select Advanced Chipset Setup from the list on the main setup screen.
2. Make sure that the USB Function is disabled.
3. Make sure that the IRQ12/M Mouse Function is enabled.
AMIBIOS SETUP ADVANCED CHIPSET SETUP
© 1996 American Megatrends, Inc. All Rights Reserved
USB Function Disabled Available Options:
USB Keyboard/Mouse Legacy Support Disabled Disabled
USB Clock 48 Mhz Enabled
USB Passive Release Enable Enable
Global Triton2 Enable Enable
Memory Hole Disable
IRQ12/M Mouse Function Enabled
8Bit I/O Recovery Time (Sysclk) 1
16Bit I/O Recovery Time (Sysclk) 1
DRAM Timings 60ns
Refresh Rate 66Mhz
Turbo Read LeadOff Disabled
Read Burst Timing x333
Write Burst Timing x333
Fast RAS to CAS Delay (Clocks) 3
LeadOff Timing 7/6/3/4
Turbo Read Pipelining Disabled
Speculative LeadOff Disabled ESC: Exit :Sel
Turn-Around Insertion Disabled PgUp/PgDn: Modify
Memory Address Drive Strength 8ma/8ma F2/F3: Color
Figure 14. Advanced Chipset Setup Screen
4. Press [ESC] to return to the main setup screen.
Continued on next page
Configuring CMOS Setup, Continued
Check Settings on
the Advanced
Chipset Screen
firealarmresources.com

Other manuals for Simplex 4120