16
Normal Care
*2397
LUBRICATION
Lubricate the rider and mower as shown in figures 13 -
18. When a grease gun is shown, wipe the fitting clean,
apply two or three shots of lithium base automotive
*2388B
Figure 13. Brake Pedal Pivot Point
Figure 17. Front Axle Lubrication Points
Figure 16. Rider Lubrication Points - Rear Half (Gear
Model Shown)
Figure 15. Front Axle Lubrication Points
Figure 14. Rider Lubrication Points - Front Half
*2402
grease, and wipe off excess grease. When an oil can is
shown, wipe the area clean, apply a few drops of oil
(SAE 30), then wipe up drips or spills.
*2390
Figure 18. Arbor Lubrication Points
Note: On 30” mower,
grease fitting is on
topside of deck.
To Next Page
Loading...
