PART NO. DESCRIPTIONREF NO QTY.
Gear Case Assembly - Heavy Duty
Footnotes
CAPSCREW, Hex Head, 1/4-20 x 2-1/2 1 1923282 1
CAPSCREW, Hex Head, 1/4-20 x 2-1/4 2 1960346 5
GEAR CASE, L.H. 3 1612136 1
FITTING, Pipe Plug 4 1668971 1
GASKET 5 1612124 1
SHAFT, Auger Cutoff 6 1732440 1
SHAFT, Worm Cutoff 7 1732182 1
SEAL, Oil 8 1612093 2
FLANGE BUSHING 9 1612149 2
PIN, Drive Lock 10 2836098 1
THRUST COLLAR 11 1612127 1
WORMGEAR, 1-3/4 OD x 1-3/8 Long 12 1612142 1
THRUST WASHER 13 2168111 1
THRUST WASHER 14 2118315 2
WORMGEAR, 21T, 3" O.D. x 7/8 Long 15 1612141 1
GEAR CASE, R.H. 16 1612137 1
NUT, Top Lock Flange 1/4-20 17 1930642 7
SEAL 18 2118118 1
BRACKET, Support 19 1732152 1
KEY, Woodruff .18 x .62 20 2818312 1
BUSHING 21 1732991 2
TUBE 22 1612111 1
KEY, Woodruff 1/4 x 3/4 23 2830246 1
The above parts group applies to the following Mfg. Nos.:
27
2010
Milwaukee, WI, USA. All rights reserved
© Copyright by Briggs & Stratton Corporation
1695824 - P1524E
1695825 - (P1728E)
1695826 - (P1732E)
1695827 - (P1738E)
1695846 - P1732EX
1695903 - (P1728EX)
1751687
To Next Page
Loading...
