PART NO. DESCRIPTIONREF NO QTY.
38" Mower Deck - Height Adjustment & Roller Bar Group
Footnotes
NUT, Push, 3/8 1 1960093 1
KNOB, Chute Control Spinner 2 1714084 1
CRANK, Height Adjustment, Black 3 1719901 1
TRUNNION, Threaded 4 1704087 1
SPACER 5 1602946 6
WASHER, 1/2 6 1960170 3
TRUNNION 7 1704086 1
WASHER, Detent 8 1704097 1
PIN, Spring 9 2816001 1
NUT, Hex Head, 1/2-13 10 1930644 2
WASHER, 5/8 11 1924366 8
ROLLER, Rounded End 12 1722036 2
ROLLER 13 1668513 6
SHAFT & BAR ASSEMBLY, Roller 38" (CE) 14 1723305A 1
SHAFT & BAR ASSEMBLY, Roller 38" 14 1729757A 1
CAPSCREW, Hex Head, 5/16-18 x 1-1/4 15 1921977 4
ARM, Rear, Mower, RH 16 1726409A 1
ARM, Rear, Mower, RH (CE) 16 1704083A 1
STRAP, Trunnion Retainer 17 1704077A 1
BRACKET, Cutting Height 18 1704116A 1
NUT, Hex, Flange Whizlock, 5/16-18 19 1931277 4
CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/4 20 1664847 6
STRAP 21 1665374 2
CARRIAGE BOLT, 3/8-16 x 1-1/2 22 1931352 3
SHAFT ASSEMBLY, Rocker 38" (CE) 23 1732098A 1
SHAFT ASSEMBLY, Rocker 38" 23 1729756A 1
Pin 24 2118053 1
CLIP, Spring 25 1960074 1
LOCKNUT, Hex, Jam, 1/2-13 26 1913744 2
TRUNNION 27 1704081A 1
NUT, Hex Toplock Spiral Flange, 3/8-16 28 2860681 5
NUT, Adjuster 29 1704082 1
SLIDE 30 1677507 1
WASHER, Plain 31 1924361 1
SHOULDER BOLT 32 2172622 1
PUSH NUT, 5/8 33 1960520 1
WASHER, Plain, 5/8 (Early models only) 34 1960020 1
BAR, Roller 38" Mower 35 1731189A 1
BAR, Roller 38" Mower (CE) 35 1704073A 1
ROD 36 1713578 1
SPRING, Extension 37 2156302 1
ROD 38 1715759 1
SUPPORT, 38" Mower 7 GA 39 1731406A 1
NUT, Push, 1/2 40 1960519 1
The above parts group applies to the following Mfg. Nos.:
2006
35
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694885 - 38" Mower
1694936 - 38" Mower
1694974 - 38" Mower
2690436 - Re
ent
2690437 - Re
ent
2690468 - 520
2690471 - 2520
2690472 - 2518
2690492 - Re
ent
2690499 - 518
TP 400-4275-02-RG-SMA
To Next Page
Loading...
Need help?
General
