PART NO. DESCRIPTIONREF NO QTY.
50" Mower Deck - Clutch & Support Group
Footnotes
* V-BELT (HA Sect., 91.10 Effective Length) Kevlar 1 1732204SM 1
* V-BELT (HA sect., 73.12 Effective Length) 2 1734131SM 1
SCREW, 3/8-16 x 3-1/4" Hex Head Cap, GR5 3 1922918SM 1
WASHER, .375 Flat (.41 I.D. x .87 O.D.) 4 1924940SM 6
PULLEY, 4-1/2" O.D. .375 I.D. .63 Groove 5 2101096SM 1
SPACER 6 1657242SM 1
ASSEMBLY, Idler Arm (includes next 3 items) 7 1726814SM 1
WELDMENT, Idler Arm 7 1726815ASM 1
BUSHING, .628 I.D. x .751 O.D. x .40 Long Powdered Metal 8 1676148SM 2
LUBE FITTING, 1/4-28 Taper 9 2812808SM 1
SPACER, .390 I.D. x .90 O.D. x .34 Long, Powdered Metal 10 1667811SM 1
PULLEY, Idler 5.000 O.D. x .375 I.D. 11 2171247SM 1
NUT, 3/8-16 Hex Large Flange 12 1960339SM 4
SPACER, .406 I.D. x 1.50 O.D. x .350 Thick Powdered Metal 13 1714255SM 1
SPRING, Extension 14 1656936SM 1
ARM, Idler 15 1733465ASM 1
WASHER, 3/8" Flat 16 1924356SM 2
SCREW, 3/8-16 x 1-1/4" Hex Head Cap, GR5 Black 17 1920415SM 1
PULLEY, Idler 18 1724387SM 1
BOLT, 5/16-18 x 1-1/2" Round Head Short Square Neck, GR5 19 1931337SM 1
WHEEL, Gage (2" Wide, 3.92 Dia.) 20 1714760SM 4
BOLT, Shoulder (Gage Wheel) 3/8-16 x 2.781 x 3/4" 21 2108765SM 4
WASHER, 1/2" Flat (0.51 I.D. x 1.00 O.D. x .10 Thick) 22 1960170SM 4
NUT, 3/8-16 Hex Flange Nyloc 23 1960687SM 4
BOLT, 3/8-16 x 1-3/4" Round Head Short Square Neck 24 1931353SM 1
SPRING, Extension .720 O.D. x 8.05 Long .102 wire 25 1714062SM 1
Note: * Part number printed on belt.
The above parts group applies to the following Mfg. Nos.:
43
2008
Milwaukee, WI, USA. All rights reserved
© Copyright by Briggs & Stratton Corporation
7800375 - Axion
7800382 - Axion
TP 400-5008-00-ZT-S
To Next Page
Loading...
