F-5
Steering wheel adjustment
The steering wheel has two positions.
The steering wheel cover (B) is decorative and
does not need to be removed for this procedure.
1. Remove the roll pin (D) securing the steering wheel (C) to
the steering shaft (F).
2. Remove the flex collar (E) and lubricate the steering
shaft (F) with anti-seize compound to ease future service.
3. Reinstall the flex collar (E) and steering wheel (C). Use
the lower hole in the steering shaft (F) and reinstall the
roll pin (D). The thick spoke of the wheel (A) should face
the operator when the wheels are turned straight forward.
The upper hole is for taller operators who need
more knee clearance.
A
A
B
C
D
E
F
To Next Page
Loading...
