59
TP-400-2086-03-LL-SMA
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1692688 50” Mower Deck
1692689 50” Mower Deck
1692881 50” Mower Deck
1692882 50” Mower Deck
50” Mower Deck - Height Adjustment & Rollers
1 916950 2 NUT, Hex, 3/8-16
2 916965 2 LOCKWASHER
3 1704082 1 NUT, Adjuster
4 1716155 1 SHAFT ASSY., Roller, 50” (Incl. Ref. Nos. 8, 9 & 11)
5 1677507 1 SLIDE
6 1924361 1 WASHER, Plain, 1/2
7 172622 1 BOLT, Shoulder, 3/8-16
8 1924366 10 WASHER, Plain, 1-1/4
9 1709195 3 SPACER
10 1668513 10 ROLLER
11 1960520 2 NUT,Push
12 1924940 5 WASHER, Plain
13 1930644 2 NUT, Hex, Flange, Lock, 1/2-13
14 1704074 1 BAR, Roller
15 1704094 1 CRANK, Cutting Height
16 1714084 1 KNOB, Height Crank
17 1960093 1 PAL NUT
18 1921977 2 CAPSCREW, Hex, 5/16-18 x 1-1/4
19 1704083 1 ARM, Rear, Mower, RH
20 1704116 1 BRACKET, Cutting Height
21 1917356 2 LOCKWASHER, 5/16
22 1917372 2 NUT, Hex, 5/16-18
23 1918452 1 COTTER PIN
24 1915726 2 NUT, Hex, Jam, 1/2-13
25 1706645 1 TRUNNION
26 118053 1 PIN, Clevis
27 1664847 6 SCREW, Hex, Taptite, 5/16 x 3/4
28 1931352 1 CARRIAGE BOLT, 3/8-16 x 1-1/2
29 1665374 3 STRAP, Mower Arm Assy.
30 1709174 1 ARM ASSY., Mower
31 916001 1 PIN, Roll, 1” Long
32 1704097 1 WASHER, Detent
33 1704086 1 TRUNNION
34 1960170 1 WASHER, 11/32
35 1704087 1 TRUNNION, Threaded
36 1704080 1 PLATE, Mower Support
37 1704114 1 INDICATOR, Cutting Height
38 1919381 1 WASHER, Flat, 5/16
39 1931202 1 SCREW, Hex, Taptite, 5/16-18 x 1-1/4
40 1922606 1 CAPSCREW, Hex, 3/8-16 x 1-3/4
41 1706443 1 ROD, Adjustment
42 1706644 1 SPACER
43 1928352 1 NUT, Hex, Whizlock, 3/8-16
To Next Page
Loading...
