Simplicity Landlord Series User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity Landlord Series Specifications

General

Brand	Simplicity
Model	Landlord Series
Category	Tractor
Language	English

Summary

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Wheel-Steer Adjustments

Adjustments for steering wheel alignment, linkage, and neutral position.

Forward Travel Stop Adjustment

Limiting maximum output speed of hydro pump for straight travel.

Reverse Travel Stop Adjustment

Controlling maximum reverse speed of hydro pump using set collar.

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic (Peerless 2600-002 or 2600-008)

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21L

Neutral Adjustment (Early Model Only)

Neutral Adjustment (Late Models with Kit)

Section 4. (Continued) Tractors with HydroGear 216-3010L Hydrostatic Transaxle

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6. (Continued) Tractors with HydroGear 311-0750/311-0800 Transaxle

Section 6. (Continued) Lawn Tractors with Eaton 750 or 751 Transaxles

Neutral Adjustment (Early Model 750 Welded Bracket)

Neutral Adjustment (Later Model 750 Plastic Bracket)

Neutral Adjustment (Model 751)

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10S Transaxle

Neutral Adjustment (Linkage with two ball joints)

Adjusting neutral for BDU10S transaxle with two ball joint linkage.

Neutral Adjustment (Linkage with one ball joint)

Adjusting neutral for BDU10S transaxle with one ball joint linkage.

Section 7. (Continued) Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Return-to-Neutral Adjustment

Section 7. (Continued) Lawn Tractors with HydroGear 318-0500/322-0500/322-0650 Transaxle (With Foot Control)

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Procedure to set neutral for mid-engine mowers with HydroGear 311-0500.

Return to Neutral Adjustment