Need help?Do you have a question about the Simplicity RT-SR50 and is the answer not in the manual?
General| Brand | Simplicity |
|---|---|
| Model | RT-SR50 |
| Category | Remote Control |
| Range | Up to 30 feet |
| Power Source | Battery |
Steps to program the remote by entering a 4-digit TV setup code to turn off the TV.
Method to program the remote by pressing channel buttons until the TV turns off.
Procedure to clear specific learned keys on the remote control and reset them to default.
Steps to program the remote to control volume and mute for the cable set-top terminal.
Steps to program the remote to control volume and mute for the television.
Steps to enable TV control of channels when a set-top terminal is not used.
Steps to revert channel control back to the cable set-top terminal.
Configure the remote to operate only specific functions of the cable set-top terminal.
Restore all functions of the cable set-top terminal to the remote control.
Program the INPUT button to control the input source of the cable set-top terminal.
Program the INPUT button to control the input source of the television.
Troubleshooting steps for the Point and Press method if the initial code search fails.
Explanation of the remote's auto shut-off feature to conserve battery life.
To Next Page