21
Maintenance and Care
Replacing the HEPA exhaust filter cont.
• Re-attach the exhaust filter holder to the
vacuum by aligning the slot at the base of
the filter holder with the clip on the vacuum
and press firmly into place.
Replacing the charcoal filter
• Open the bag compartment lid and locate
the charcoal filter on the left side of the
compartment.
• Using the latch on top, remove the
charcoal filter holder.
• Remove and throw away the used filter.
• Insert new charcoal filter and snap the
charcoal filter holder back into place.
• Close the bag compartment lid.
To Next Page
Loading...
Need help?
General
