SimpLinx SMX-RNS02 - Page 21

man-en-smx-rns02.docx
© 2020 SIMPLINX
- 20 -
If you have a wired or Wi-Fi connection ready;
 Open your browser
 On the Address bar, enter " http://192.168.169.254:3000" and press ENTER
 The login screen will open for the SimpLinx device settings.
 Enter your password and press ENTER
Predefined web login password is "simplinx"
 Enter the required internet settings from the "WAN" and "Wireless Settings" pages.
 Go to the "LAN Settings" page.
 In order to connect to your field devices, your Ethernet field devices and SMX-RNS02 device
must be on the same IP network. Enter the settings correctly.
 Example 1 (Predefined)
 IP: 192.168.168.254
 Subnet Mask: 255.255.255.0
 IP (PC): 192.168.168.250
 In this case, you can use all IP addresses in the range of [192.168.168.1 -
192.168.168.249 ] and [192.168.168.251 - 192.168.168.253] for field devices.
 Example 2
 IP: 192.168.0.1
 Subnet Mask: 255.255.255.0
 IP (PC): 192.168.0.2
 In this case, you can use all IP addresses in the range [192.168.0.3 - 192.168.0.254] for
your field devices.
 Example 3
 IP: 10.0.0.1
 Subnet Mask: 255.255.255.0
 IP (PC): 10.0.0.2
 In this case, you can use all IP addresses in the range [10.0.0.3 - 10.0.0.254] for your
field devices.