Simply Headsets Yealink EHS 36

To Next Page

Yealink EHS 36 Setup Guide

for Jabra.

The EHS 36 is designed to work with Jabra, Plantronics and Sennheiser

headsets. So not all cables that come in the box are required. Please pay close

attention to the next couple of pages to ensure you are using the right cables

for your chosen headset. This manual is only for the model headset you have

purchased so will not talk about all the cables.

For a Jabra Headset you will need:

Need help?

Do you have a question about the Simply Headsets Yealink EHS 36 and is the answer not in the manual?

Summary

Identifies the RJ12 cable as approximately 23cm long with a round black cable.

Identifies the RJ9 cable as the one with the curly cord.

Identifies the RJ45 cable as approximately 31cm long with larger connectors and a flat black cable.

Instructions for programming Jabra Pro 920 or 925 headsets for EHS.

Instructions for programming Jabra Pro 9450 headsets for EHS.

Instructions for programming Jabra Pro 9460/9470/Motion office headsets.

Instructions for programming Jabra Engage 65 headsets for EHS.

Instructions for programming Jabra Engage 75 headsets using Jabra direct software.

General