Need help?Do you have a question about the Simpson 260-8P and is the answer not in the manual?
General| Brand | Simpson |
|---|---|
| Model | 260-8P |
| Category | Measuring Instruments |
| Language | English |
Alerts users to hazardous conditions and defines safety symbols for proper instrument operation.
Provides contact information for technical support from Simpson Electric Company.
Details Simpson Electric Company's warranty policy and procedures for repairs and returns.
Overview of the Simpson 260 Series 8P Volt-Ohm-Milliammeter and its capabilities.
Explains the electronic overload protection system and its function to prevent damage.
Details the two batteries used for ohmmeter circuits and overload protection.
Procedure to test the proper operation of the instrument's overload protection circuit.
Presents specifications including voltage, current, resistance ranges, and accuracy.
Explains how accuracy is expressed and how to select ranges for better precision.
Highlights safety precautions and warning symbols for operating the instrument safely.
Describes the audio alarm feature used for quick continuity checks.
Details the AC high voltage probe for extending AC voltage measurement range.
Explains the Amp-Clamp for AC current measurements via AC voltage output.
Instructions for checking the instrument upon receipt and verifying contents.
Information on the Simpson Electric Company warranty policy.
Guidelines for packing and shipping the instrument.
Details the battery types and requirements for the instrument's operation.
Describes how to position the instrument for optimal viewing and accuracy.
Illustrates and describes the front panel controls, jacks, and indicators.
Essential safety guidelines to prevent injury and damage during operation.
Explains the function switch's polarity reversing feature for semiconductor testing.
Guidance on how to measure unknown voltage or current by starting with the highest range.
Description of test leads, alligator clips, and their use.
Procedure for measuring DC voltage in the 0-250 mV range.
Procedure for measuring DC voltage in the 0-1V range.
Steps for measuring DC voltage across multiple ranges from 2.5V to 250V.
Procedure for measuring DC voltage in the 0-500V range, emphasizing safety.
Procedure for measuring DC voltage in the 0-1000V range, with high voltage safety warnings.
Steps for measuring AC voltage across ranges from 2.5V to 250V.
Procedure for measuring AC voltage in the 0-500V range with safety notes.
Procedure for measuring AC voltage in the 0-1000V range, highlighting safety.
Procedure for measuring direct current in the 0-50 microampere range.
Steps for measuring direct current in mA ranges from 1mA to 500mA.
Procedure for measuring direct current in the 0-10 Ampere range, with safety notes.
Steps for measuring resistance, including zero adjustment and range selection.
Guidance on measuring resistance of semiconductors like diodes and transistors.
Procedure for performing continuity tests using the audible alarm feature.
Recommendations for regularly inspecting the instrument for damage.
Instructions for replacing the 1.5V and 9V batteries.
Procedure for replacing the 1A and 2A fuses.
Guidance on periodic inspection of test leads for damage.
Instructions on cleaning, storage, and general care of the instrument.
To Next Page
