To Next PageTo Next Page
Need help?Do you have a question about the Simpson MS60852 and is the answer not in the manual?
General| Power Source | Gasoline |
|---|---|
| Max Pressure | 3200 PSI |
| Flow Rate | 2.5 GPM |
| Hose Length | 25 ft |
| Rated Pressure (PSI) | 3200 PSI |
| Flow Rate (GPM) | 2.5 GPM |
| Frame Material | Steel |
| Water Flow | 2.5 GPM |
| Nozzle Types | 0°, 15°, 25°, 40° and Soap |
| Engine | 208cc OHV Engine |
| Wheel Type | Pneumatic |
| Nozzle Tips | 0°, 15°, 25°, 40° and Soap |
| Nozzles Included | 5 |
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols for hazard recognition.
Details critical risks and precautions related to carbon monoxide from engine exhaust.
Lists essential safety warnings to be read and understood before operating the unit.
Warns about potential chemical content in the product and the necessity of hearing protection.
Addresses risks from gasoline, sparks, and hot engine components that can cause fire.
Covers fuel expansion, operating in ventilated areas, and fire extinguisher needs.
Warns about muffler heat damage to surfaces and potential material ignition.
Details safe fuel storage practices and hazards of using certain chemicals.
Details risks of carbon monoxide poisoning and ventilation requirements.
Advises on using appropriate cleaning fluids and avoiding bleach.
Explains risks of high-pressure leaks and preventative measures.
Guides on relieving pressure before maintenance and using correct accessories.
Advises on protective gear, safe spraying practices, and trigger lock usage.
Covers general safe operation, alertness, and equipment integrity.
Details safe engine starting procedures and managing kickback.
Guides on proper gun grip, stability, and child safety around the unit.
Provides guidelines for safely transporting and storing the pressure washer.
Details how to avoid electrical hazards during cleaning operations.
Warns about chemical use and the necessary protective measures.
Advises on safe tire inflation and spray direction for pneumatic tires.
Warns about touching hot engine components during operation.
Recommends seeking assistance for lifting the heavy unit.
Outlines the initial steps for assembling the pressure washer.
Highlights critical safety warnings for starting the engine and unit.
Details how to connect the water supply, high pressure hose, and spray wand.
Covers connecting nozzles, ensuring water supply, and releasing air.
Instructs to verify the engine switch and choke settings before starting.
Explains how to pull the starter grip and adjust the choke for engine start.
Introduces the main parts of the pressure washer with a diagram.
Describes the key parts of the pressure washer system.
Identifies essential engine controls like choke and switch.
Guides on assembling the handle and nozzle holder.
Covers final connections and important notices about engine oil.
Defines key terms like PSI, GPM, CU, and Bypass Mode.
Highlights critical operating warnings and system features like thermal relief.
Provides instructions on how to use the spray wand safely and effectively.
Explains how to choose and change nozzles based on the task.
Warns about potential damage to surfaces from high-pressure spray.
Details the steps for applying cleaning chemicals safely.
Outlines starting steps and reiterates critical safety warnings.
Details safe fueling practices, fuel expansion space, and fuel stabilizers.
Guides on connecting the water source, verifying filter, and attaching hoses.
Covers nozzle selection, turning on water, and starting the engine.
Details the steps for safely turning off the pressure washer and rinsing.
Explains the importance and correct usage of the trigger lock for safety.
Warns about hazards during maintenance and fire risks.
Directs users to the engine manual and notes pump maintenance requirements.
Provides step-by-step instructions for cleaning clogged nozzles.
Explains how to remove, clean, and re-insert the water inlet filter.
Guides on preparing the engine for storage to prevent fuel deterioration.
Recommends using pump guard for storage and outlines its application.
Details how to drain and store the hose, gun, and siphon hose.
Warns about using only recommended accessories and their ratings.
Lists technical details of the pressure washer model.
Outlines the 90-day and 1-year limited warranties for components and pump/frame.
Details the user's responsibilities for warranty claims and product care.
Lists items and conditions not covered by the product warranty.
Addresses common causes and solutions for engine starting failures.
Helps diagnose and resolve initial pressure problems.
Provides steps to clear air from the hose and system for proper operation.
Solves problems with drawing chemicals and post-use pressure loss.
Addresses leaks at the gun, wand, and pump connections.
Explains causes and solutions for pump pulsation.
