Simpson Power Shot Series - Machine Preparation; Hose Connections

2.3 Hose Connections
2.0 Operating Instructions (cont.)
2.2 Machine Preparation
1. Check oil level in the pump and fill with
proper grade of oil (Fig. 2.1-1) (See Pump
Maintenance).
2. Check engine oil level and fill with proper
grade oil if necessary (Fig. 2.1-2).
3. Check fuel supply (Fig. 2.1-3). Fill if
necessary (see engine owner’s manual.)
4. Check the hose, gun, and accessories for
damage or wear. Repair or replace if
necessary.
5. Check the female quick-couplers for o-
ring seals. Replace if necessary.
www.simpsoncleaningsystems.com
page 9
Reference the IMPORTANT SAFETY WARNINGS section of this manual before operating.