Simpson Refrigeration controlling the temperature 9
The refrigerator temperature control is affected by altitude
and is recommended that it be set warmer to compensate.
e.g. at 1000 metres above sea level set the refrigerator temperature
control to one half setting warmer than MID.
Wait 24 hours after changing settings: When you change
temperature settings, make small adjustments and wait 24 hours
before assessing whether you need to make any further changes.
NB: Testing ice cream is a good way to check the freezer temperature.
Testing drinking water is a good way to check the refrigerator
compartment temperature.
• Coldest freezer setting is not recommended in normal and
very hot climates as this will limit the cooling to the
refrigerator section.
• In very cold climates (where temperatures are below 10°C)
the freezer may need to be set colder.
• Adjustment of the fridge compartment temperature may cause
a small movement in freezer temperature.
Chill Channel – Side by Side model only
The chill channel allows air to circulate through your refrigerator. For
optimum cooling, keep the channel behind your shelves clear.
Try to avoid storing plates, trays or any object that may extend beyond the
back edge of your shelves. Doing so may block the cold air ow from
the vents located in the control housing, causing uneven temperatures in
your refrigerator. This may also freeze items stored on the top shelf.
Top Mount temperature control
Adjusting the refrigerator temperature – Top Mount
freezer (TM) model
1. Select the refrigerator control (bottom knob).
2. Rotate the knob clockwise to set colder.
3. Rotate the knob anti-clockwise to set less cold.
Adjusting the freezer temperature – Top Mount
freezer (TM) model
1. Select the freezer control (top knob).
2. Rotate the knob clockwise to set colder.
3. Rotate the knob anti-clockwise to set less cold.
Bottom Mount temperature control
Adjusting the refrigerator temperature – Bottom Mount
freezer (BM) model
1. Select the refrigerator control (top knob).
2. Rotate the knob clockwise to set colder.
3. Rotate the knob anti-clockwise to set less cold.
Adjusting the freezer temperature – Bottom Mount
freezer (BM) model
1. Select the freezer control (bottom knob).
2. Rotate the knob clockwise to set colder.
3. Rotate the knob anti-clockwise to set less cold.
To Next Page
Loading...
