How to fix a Simpson SWF10832 that won't start?
If your Simpson Washer isn't starting, make sure the door is firmly closed, the plug is properly inserted into the power socket, and there is power at the socket. Also, check that you've pressed the Start/Pause button and that the delay start option isn't active. If a delay start has been selected, cancel it to start the wash immediately.
What to do if my Simpson Washer is leaking water?
If there's water on the floor near your Simpson Washer, it could be due to using too much or unsuitable detergent, which creates excessive foam. Try reducing the amount of detergent or switching to a different brand. Also, check the water inlet hose connections for leaks and ensure the drain hose isn't damaged; replace it if necessary.
Why is my Simpson Washer not filling with water?
If your Simpson Washer isn't filling with water, first check that the water tap is fully open. Then, inspect the inlet hose for any squashing or kinks that might be blocking the water flow. Also, the filter in the inlet hose may be blocked, so clean it. Finally, ensure that the door is properly closed.
What to do if the Simpson SWF10832 Washer door won't open?
If the door of your Simpson Washer won't open, it could be because the program is still running. Wait until the washing cycle is complete. If the door lock hasn't released, wait about 5 minutes. If there is still water in the drum, select the 'Spin' or 'Drain' program to empty it out.
How to improve washing results in my Simpson SWF10832?
If you're getting unsatisfactory washing results from your Simpson Washer, try increasing the amount of detergent or switching to a different detergent. For stubborn stains, pre-treat them with commercial stain removers before washing. Also, make sure you've selected the correct temperature for the type of fabric you're washing and that you're not overloading the machine.
Why is my Simpson SWF10832 Washer vibrating so much?
If your Simpson Washer is vibrating excessively or making a lot of noise, ensure that the transit bolts and packing have been removed and that the support feet are properly adjusted to level the machine. An uneven distribution of laundry inside the drum, too little laundry, or an unstable floor can also cause these issues. Pause the machine and redistribute the laundry manually. Also, make sure you are not using too much detergent.
Why does my Simpson Washer fill and then immediately drain?
If your Simpson Washer fills with water and then empties it immediately, the end of the drain hose might be too low. Also, check the drain hose connection, as it may be squashed or kinked. Clean the drain pump. Ensure that the ‘Rinse Hold’ or ‘No Spin’ option is disabled, and select a spin program. Another potential cause is that the laundry is not evenly distributed in the drum, so pause the machine and redistribute it manually.
Why is my Simpson Washer making an unusual noise?
If your Simpson Washer is making an unusual noise, ensure the appliance is correctly leveled and that all transit bolts and packaging have been removed. The load may be too small, so adding more laundry in the drum may help.
General| Capacity | 8 kg |
|---|---|
| Spin Speed | 1200 RPM |
| Energy Star Rating | 4 stars |
| Water Rating | 4.5 stars |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Color | White |
Covers general precautions, warnings, and advice for safe operation and maintenance of the appliance.
Provides essential safety guidelines and warnings related to the installation process of the washing machine.
Details safety instructions and restrictions for using the washing machine for its intended domestic purposes.
Outlines safety measures to prevent children from accessing or misusing the washing machine.
Describes how to use the program selector dial to choose wash programs and temperatures.
Details the available washing options like Stain, Eco, and Quick Wash.
A quick guide to setting up and starting a wash program in four simple steps.
Instructions on preparing and loading laundry into the washing machine drum correctly.
Guidance on using the detergent dispenser and selecting appropriate detergents and additives.
Steps to initiate the selected wash program using the Start/Pause button.
Methods and advice for treating and removing common stubborn stains from fabrics.
Guidance on choosing and using detergents, softeners, and other additives.
Step-by-step guide on how to safely unpack the appliance and remove transit packaging.
Guidance on placing the washing machine correctly to ensure stability and proper operation.
Information and warnings regarding the electrical connection of the appliance.
To Next Page