Need help?Do you have a question about the Simrad Halo20+ and is the answer not in the manual?
General| Antenna Size/Length | 20 inches |
|---|---|
| Power Output | 20 W |
| Beam Width | 5.0° Horizontal |
| Networking | Ethernet |
| Connectivity | Ethernet |
| Waterproof Rating | IPX6 |
| IP Rating | IPX6 |
| Frequency | 9.4 GHz |
| Rotation Speed | 24 RPM |
| Display Compatibility | Simrad NSS, NSO, GO series MFDs |
| Weight | 5.6 kg |
| Supply Voltage | 12/24 V DC |
| Power Supply | 10-32 V DC |
| Operating Temperature | -25 to +55 °C |
Discusses factors specific to mounting the radar on a vessel's roof or hard top.
Provides guidance on calculating the correct scanner height relative to the vessel's structure.
Illustrates the interconnection cable routing between the scanner and display unit.
Explains the use of the adapter cable for connecting to 5-pin Ethernet ports.
How to align the heading marker for accurate MARPA and EBL readings.
Setting the antenna height to optimize sea clutter and performance.
Explains the meaning of the status LED codes for diagnostics.
Lists specific error codes and their corresponding recommended solutions.
To Next Page
