Need help?Do you have a question about the Simrad Halo24 and is the answer not in the manual?
General| Antenna Size/Length | 24 inches |
|---|---|
| Beam Width | 4.9° Horizontal, 20° Vertical |
| Radar Technology | Pulse Compression |
| Supply Voltage | 12-24 V DC |
| Networking | Ethernet |
| Display Compatibility | Simrad NSS, NSO, and other compatible displays |
| Type | Solid-state Doppler radar |
Provides instructions for safely routing and securing interconnection cables to prevent damage and ensure proper function.
Guides on selecting an optimal mounting position for the radar scanner to maximize performance and avoid obstructions.
Discusses factors for mounting the radar on a vessel's roof, including beam clearance and elevation.
Provides guidance and diagrams to determine the correct scanner height relative to the vessel's hard top.
Illustrates how raising the radar scanner off a hard top improves radar energy clearance for better performance.
Explains radar positioning to allow the full beam to clear the vessel's superstructure for best performance.
Shows a diagram illustrating the interconnection cable routing between the scanner and the display unit or switch.
Details how to connect the scanner's interconnection cable, including pin-outs and retainer usage.
Step-by-step instructions for physically mounting the radar scanner unit onto the vessel's structure.
Describes how to connect the scanner using an Ethernet socket or a 5-pin socket via an adapter.
Details the DC input requirements, fuse fitting, and recommended wire gauges for extending power connections.
Information on common error messages and where to find software updates for the radar and display.
A table listing specific error codes, their descriptions, and recommended solutions for troubleshooting.
To Next Page
