Simrad RS35 VHF HS35 - Section 7 - Wireless Handset Setup Menu

Section 7 - Wireless handset setup menu (HS SETTING)
Hold down CALL/MENU key for about 1 second to access the following HS SETTING options.
The following menu options are explained in this section.
HS SETTING SUBSCRIBE Section 7-1
REGISTERED HS Section 7-2
See sections 1-3 and 1-4 if you want to know how to move around the menu and enter, save
and change data.
7-1 Register a wireless handset (SUBSCRIBE)
Before a HS35 wireless handset can be used with the RS35 radio, it must be registered (paired)
with the radio through the subscription process.
HS SETTING
►SUBSCRIBE
REGISTERD HS
SUBSCRIBE
►YES
NO
SUBSCRIBE
WAITING
EXIT->ESC
SUBSCRIBE
HS SUBSCRIBE
SUCCESSFUL!
EXIT->ESC
1. Ensure the HS35, that you want to subscribe, is charged and turned OFF.
Note: If you have another HS35 that is already subscribed to the RS35, ensure it remains o
during this proceedure.
On the RS35 base station radio:
2. Select HS SETTING, then SUBSCRIBE.
3. Select YES. The radio will display WAITING.
On the HS35 wireless handset:
4. Turn ON the HS35 that you want to subscribe to the RS35, the display will show
SEARCHING.
5. Press SCAN key until the display shows REGISTER.
6. The display will soon show CONNECTING, and then the HS35 will be paired to the RS35.
7-2 Delete a registered wireless handset (REGISTERED HS)
1. To delete an already registered handset, select REGISTERED HS.
2. Select the handset you wish to remove, press ENT and then YES.
HS SETTING
SUBSCRIBE
►REGISTERD HS
REGISTERED HS
►CLEAR HS1
CLEAR HS2
CLEAR HS1
►YES
NO
Simrad - RS35 & HS35 Operation Instructions 45