• Never let the cleaning fluid drip directly on the surface to be cleaned, always apply it to the cleaning
cloth first.
• After the wet-cleaning with a non-volatile (slowly-drying) cleaning fluid and a clean, dry cleaning
cloth, carefully wipe the surface dry from the center to the edges (not back and forth) in order to
avoid residual drying marks.
• If drying residues are still visible after the first cleaning procedure, the procedure should be repea-
ted carefully with a fresh cleaning cloth. If repeated cleaning efforts do not yield the desired results,
the cleanliness of the cleaning cloths and the cleaning fluids should be examined.
Sinar Photography AG - Farbhofstrasse 21 - 8048 Zürich/Switzerland
Phone +41 (0)44 217 80 30 - Fax +41 (0)44 217 80 50 - contact@sinar.ch - www.sinar.ch
13.10.10 - Seite 12
To Next Page
Loading...
