-
-
1 , 2 hours later
setting
temp.
●
℃
●
●
●
●
NOTE: This remote controller is universal, it could be used for many units, some
buttons of this controller which are not available to this unit will not be
described below.
X-FAN button
Set X-FAN on (the character of X-FAN will
appear)or off (the character of X-FAN dis-
appear) by pressing this key under cool
or dehumidify mode. Once energized,the
unit will be defaulted to be X-FAN off.
This function can not be set under auto,
fan or heat mode, and the character of
X-FAN won't appear.
Note： X-FAN is the alternative expression
of BLOW for the purpose of understanding.
Press this button to select LIGHT on or off
in the displayer. When the LIGHT is on,
the icon will be displayed and the indi-
cators' light in the displayer will be on.
When the LIGHT is off, the icon will be
disappeared and all the indicators' light in
the displayer will be off.
Light button
LIGHT
Press this button, enter into SLEEP state,
when repressed, it will quit. The sleep function
and FAN mode.
will be canceled with the stop of the unit.
There is no SLEEP function under AUTO
is the icon for sleep
function.
SLEEP
Sleep button
At COOL, DRY mode: the SLEEP mode runs
after 1 hour, the setting temp. will be increased
by 1 (2 ),2 hour later, setting temp. will be
increased by 2 ( 4 )and then will run at
this setting temperature.
after 1 hour, the setting temp will be
At HEAT mode: the SLEEP mode runs
decreased by
then it will run
at setting temperature.
℃
℃
℃
will be decreased by 2
Remote controller
X-FAN
10
NAMES AND FUNCTIONS OF THE REMOTE CONTROLLER
°
F
°
F
(2 )
°
F
(4
°
F)
FAN
AUTO
OPER
HEALTH
AIR
FILTER
TURBO
ON/OFF
X-FAN
HOUR
HUMIDITY
ON/OFF
MODE
FAN
X-FAN
TURBO
TEMP
TIMER
SLEEP
LIGHT
To Next Page
Loading...
