What to do if my Sinclair AMC-12AN doesn't start?
If your Sinclair Air Conditioner isn't starting, several issues could be the cause. First, ensure the power plug is tightly inserted into the socket. If the connection is loose, insert it firmly. If the plug or socket is faulty, you'll need to ask an electrician to replace them. Also, check the fuse; if it's broken, have an electrician replace it.
How to fix Sinclair AMC-12AN Air Conditioner when the LED displays H8?
If your Sinclair Air Conditioner's LED is displaying "H8", it indicates that the water tank is full. To resolve this, you need to pour out the water from the tank. Please refer to figure P7 in the manual for visual guidance.
What to do if Sinclair Air Conditioner LED displays "E5"?
If the LED on your Sinclair Air Conditioner displays "E5", it could be due to an unstable power supply or a malfunction. Try cutting off the power supply for 10 minutes, then turn the unit back on. If the "E5" error persists, inform a maintenance technician for assistance.
Why is my Sinclair AMC-12AN Air Conditioner not blowing cool air in COOL mode?
If your Sinclair Air Conditioner is set to COOL mode but not blowing cool air, it could be because the room temperature is lower than the set temperature; this is normal. Alternatively, the evaporator might be frosting. In this case, the unit is in defrosting operation and will return to normal operation after defrosting.
Why is my Sinclair AMC-12AN Air Conditioner not blowing cool air in DRY mode?
If your Sinclair Air Conditioner is set to DRY mode but not blowing cool air, the evaporator might be frosting. The unit is running a defrosting operation and will resume normal operation after defrosting.
What does it mean when my Sinclair AMC-12AN Air Conditioner LED displays "F1"?
If the LED display shows "F1" on your Sinclair Air Conditioner, it indicates that the room air temperature sensor is malfunctioning. Please inform a maintenance technician for assistance.
What does it mean when my Sinclair AMC-12AN LED displays "F2"?
If the LED display shows "F2" on your Sinclair Air Conditioner, it means that the tube temperature sensor is malfunctioning. Please inform a maintenance technician to maintain.
General| Brand | Sinclair |
|---|---|
| Model | AMC-12AN |
| Category | Air Conditioner |
| Language | English |
To Next Page
